Oem iPhone 8 Iphone LCD Screen Replacement Cell Phone LCD Screen Black
Only fit for iPhone 8 (A1863, A1905, A1906) Not compatible with any other models.If you not very sure the phone model, please check the rear of the phone
Should transfer home button with fingerprint sensor, front camera, ear speaker and silver metal plate from your old phone
The screen with three ribbon flex cable .Pls connect the front camera flex cable first,make sure the direction of the cable is correct ,After connect the front camera cable firmly ,then connect other two flex cable
Tips: moderately curved the metal plate on the screen when lock screws, it can avoid the flex cable pressed to back light too tight. otherwise it can appear dark in some part of the screen
Quality Guarantee: All screens are full tested and 100% in good condition before shipping. We are responsible for any damage during transit or quality problem.contact us if any need
Disassembling
1.When disassembling your iPhone8, please don't just pull the screen out directly.The ribbon cable of the "Home" button is connected to the screen.
It is very flimsy You should open up thescreen a little,disassemble the ribbon cable and then get the screen out.
2.When install the screw of the camera, please notice that the long screw must be at the top left corner, or it will damage the LCD screen.
3.If the phone is deformed, it is easy to get stuck when installing, please do not press down directly, it's easy to burst the screen, you should press it downward by flat pushing.
4.The screen belongs to fragile items, so please be careful when you install it in case it break.
If your phone meet some problems like cannot turn on,touch insensitive, flash, lines on screen etc, please follow below steps:
1.Please check the LCD to make sure the flex cables are in good condition and there are no debris on the connectors.
2.Disconnect and reconnect the flex cables from the motherboard side.
3.Then Reboot: Hold buttons (Home, Up volume, and Power button) untill the phone switch down and then switch up again.
4.Make sure for iPhone 8 IOS is upgraded to the latest version.
| Compatible Model | For iphone 8 LCD |
| Color | Black&white |
| Resolution | 1334*750 |
| Screen Size | 4.7 inches |
| Quality | Original/OEM,no dead pixel, no dot, no defective |
| With Components | ear speaker mesh, ear speaker rubber, front camera holder, sensor holder, and LCD and digitizer flex connector foam |
| Quality Control | 100% tested one by one at least 3 times before shipping |
| Transportation | DHL, FEDEX, UPS, EMS |
| Payment methods | T/T, , MoneyGram,100% payment before shipping |
WHY CHOOSE US ?
*Located in guangzhou largest mobile phone accessories wholesale, we can provide the latest product information, and the most complete mobile phone accessories, to provide one-stop service for you.
*We own our phone accessories producing factory.
*Dare not say our price is the cheapest,but we will provide you with the best quality
*Four years experience of trading,More than a decade of store operations
*We have a professional QC team. Each products are through strict test with inspection machine before shipment, to ensure the goods can working in your country.
*Choose us because of your wisdom.
Product Tags:
|
|
Oem iPhone 8 Iphone LCD Screen Replacement Cell Phone LCD Screen Black Images
|
